1. AMERICAN CARS AND TRUCKS ONLY
2. BODY: Stock OEM or Late model style.
3. SPOILER: Flat 8” by 72”
4. FRAME: Stock or square tube frames only (no round tube frames allowed)
   104” minimum wheel base.
   May splice for shorting
   Full OEM frames or clip cars with stock OEM front clips (see weight rules***).
5. WEIGHT: 2800lbs cars and trucks
   **Add 100lbs for cars and trucks with quick change.***Add 100lbs for clip cars.
6. FUEL: Gas only (fuel cell required).
7. WHEELS: Any up to 14” wide.
8. TIRES: RC4 or 55’s or ART D56 and Goodyear Hoosiers A-40, D-40, H-40 (D-55’s –D-56’s and Goodyear’s must stick 60)
9. SUSPENSION:
   FRONT - Must be stock appearing steering, components must be stock, can use after market upper and lower control arms. Springs can be after market. Stock appearing. Jack bolts allowed. Racing Shocks allowed but must be in stock location.
   REAR - 3 link or 4 link allowed. May use coilovers.
10. REAR END - Quick change allowed *see weight rules*
11. TRANSMISSION: Stock OEM. No aftermarket transmission.
12. CLUTCHES: May be 3 disc clutches. No direct drives. No ram couplers. Must have working forward and reverse.
13. ENGINE: OEM up to 362 cubic inch max. You may run aftermarket rods and crank shafts. Wet sump only. Flat top pistons and flat tappet cams only.
14. CARBUERATOR: One. No predators. No dominators.
    
15. IN AN ATTEMPT TO MAINTAIN THAT NO ONE USES TRACTION CONTROL, THE TRACK HAS THE RIGHT TO BUY ANY PART OFF OF THE CAR AT FAIR MARKET VALUE. (ANY PART THAT PERTAINS TO TRACTION CONTROL)
16. * This class must have 10 cars or the purse may be cut one position; five cars or less may warrant cutting the purse two positions.

THE ABSENCE OF A SPECIFIC RULE DOES NOT IMPLY APPROVAL, CONSENT, OR PERMISSION REGARDING THAT SUBJECT. ANY QUESTION OR DOUBTS REGARDING SUCH MATTERS SHOULD BE DIRECTED TO RACEWAY OFFICIALS!!